DKK 0,00
(fragt pris: 0,00)
Nanoxia NXRGBC, Trådløs, Svart, Hvit, Knapper, IR Kabelfri, 12 V, 3x 2 A
Varenr.: [3303685] | Producent: Nanoxia | Model-nr.: NXRGBC | EAN: 4260285296499
Fjargoymsla (Veitingartíð til DK goymslu er 2-3 gerandisdagar)
Fjargoymsluvøra, veitingartíð til DK goymslu er 2-3 gerandisdagar. Eftir tað verður vøran send úr DK fyrstkomandi týsdag, og leverað í FO eftirfylgjandi týsdag. Meira kunning
Leveringsmuligheder - Vælges ved checkout
Heintast
ÓKEYPIS
Útbering.
95,00
DKK
160,00
Uttan MVG 128,00
Prísur við heinting í Tórshavn ella Klaksvík
160,00
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Opret bruger
Login
Opret bruger
Login
Send på mail
As an optional accessory for our RGB Rigid LED, we offer this practical controller with remote control.
If you want to brighten up your case (or even your living room) with a RGB LED from Nanoxia, you can connect it via a mainboard with a corresponding RGB header – or you can use our controller
Included in the delivery are the controller itself, as well as a handy infrared remote control, to choose between different colors and lighting modes.
The controller is connected to the RGB Rigid LED cable. There are two cables, each 45 cm long, on the controller. One cable ends in an S-ATA power connector to connect the controller to the power supply of a PC. The second cable has the infrared receiver, which can receive the signals from the remote control.
The length of the cables ensures that controllers and IR receivers can be placed in favorable locations in the case, to ensure that the signal reaches the RGB Rigid LED.
If you want to brighten up your case (or even your living room) with a RGB LED from Nanoxia, you can connect it via a mainboard with a corresponding RGB header – or you can use our controller
Included in the delivery are the controller itself, as well as a handy infrared remote control, to choose between different colors and lighting modes.
The controller is connected to the RGB Rigid LED cable. There are two cables, each 45 cm long, on the controller. One cable ends in an S-ATA power connector to connect the controller to the power supply of a PC. The second cable has the infrared receiver, which can receive the signals from the remote control.
The length of the cables ensures that controllers and IR receivers can be placed in favorable locations in the case, to ensure that the signal reaches the RGB Rigid LED.