DKK 0,00
(fragt pris: 0,00)
XtendLAN PETG filament 1,75mm bright blue 1kg
Varenr.: [25972040] | Producent: XtendLan | Model-nr.: 3DF-PETG1.75-FBL 1kg | EAN: 8592457201380
Produktet har ikke et billede - illustrationen viser produktets kategori
Útselt í løtuni, óviss veitingartíð
Útselt í løtuni, óviss veitingartíð. Meira kunning
Leveringsmuligheder - Vælges ved checkout
Heintast
ÓKEYPIS
Pakkaboks
29,00
Útbering.
95,00
DKK
260,00
Uttan MVG 208,00
Prísur við heinting í Tórshavn ella Klaksvík
260,00
Gev mær boð tá vøran er tøk aftur
Legg aftrat lista
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Send på mail
XtendLAN PETG filament 1,75 mm bright blue 1 kg
Plastic filament for 3D printing, on a spool. PET-G (Polyethylene Terephthalate Glycol Modified) is a material well known for its plastic bottles. PETG combines the best of ABS and PLA properties for 3D printing. It is a strong and tough material. In terms of durability, the material is close to polycarbonates. It has very little heat shrinkage and is suitable for printing even large objects. It has a high resistance to solvents and acids. It can withstand high and low temperatures. It has very good adhesion to the substrate when 3D printing. The printed object can be heat polished. The filament is vacuum protected and a desiccant bag is present in each package to prevent any moisture from affecting the material. Supplied in cardboard packaging with a window for colour checking.
BASIC SPECIFICATIONS
Fibre material: PET-G
Fibre diameter: 1,75 mm
Recommended extruder temperature: 230 - 250 °C
Recommended pad temperature: 70 - 90 °C
Coil dimensions: 200 mm diameter x 66 mm height (57 mm centre hole diameter)
Weight: 1 kg
Colour: bright blue
Plastic filament for 3D printing, on a spool. PET-G (Polyethylene Terephthalate Glycol Modified) is a material well known for its plastic bottles. PETG combines the best of ABS and PLA properties for 3D printing. It is a strong and tough material. In terms of durability, the material is close to polycarbonates. It has very little heat shrinkage and is suitable for printing even large objects. It has a high resistance to solvents and acids. It can withstand high and low temperatures. It has very good adhesion to the substrate when 3D printing. The printed object can be heat polished. The filament is vacuum protected and a desiccant bag is present in each package to prevent any moisture from affecting the material. Supplied in cardboard packaging with a window for colour checking.
BASIC SPECIFICATIONS
Fibre material: PET-G
Fibre diameter: 1,75 mm
Recommended extruder temperature: 230 - 250 °C
Recommended pad temperature: 70 - 90 °C
Coil dimensions: 200 mm diameter x 66 mm height (57 mm centre hole diameter)
Weight: 1 kg
Colour: bright blue