DKK 0,00
(fragt pris: 0,00)
WiFiHW 2.5GPOE 2.5Gbps PoE injector
Varenr.: [25971055] | Producent: SOL | Model-nr.: 2.5GPOE
Produktet har ikke et billede - illustrationen viser produktets kategori
Útselt í løtuni, óviss veitingartíð
Útselt í løtuni, óviss veitingartíð. Meira kunning
Leveringsmuligheder - Vælges ved checkout
Heintast
ÓKEYPIS
Pakkaboks
29,00
Útbering.
95,00
DKK
405,00
Uttan MVG 324,00
Prísur við heinting í Tórshavn ella Klaksvík
405,00
Gev mær boð tá vøran er tøk aftur
Legg aftrat lista
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Send på mail
802.3af/at/bt PoE injector with support for 10/100/1000/2500 Mbps speeds for powering active elements with integrated PoE extractor over Ethernet cable.
The injector is suitable for a wide range of network elements (access points, IP cameras, VoIP, modems, etc.).
Functions and features:
- An economical alternative to upgrade your network to IEEE 802.3at PoE+ or 802.3bt PoE++.
- Active PoE standard negotiation protects connected devices
- 2.5Gbps data transfer capacity
- PoE port with a maximum output of 90W
- Support for a wide range of IEEE 802.3at/bt (PoE+/PoE++) enabled devices
- Wall or DIN rail mounting flexibility for a variety of installation environments
- groove on the injector body for fixing multiple pieces into one block
Technical Specifications:
- Interface: 1x shielded RJ-45 LAN connector, 1x shielded RJ-45 LAN+POE connector.
- All 4 data pairs active for gigabit data rates
- Injector dimensions: 43 mm x 73 mm x 42 mm
- 90 watts delivered up to 100m with 56V power supply
- PoE operation in 4 pairs (Type 4 per 802.3bt)
- PoE operation in 2 pairs (Type 3 per 802.3at/af)
- Power jack input: 2.1 mm x 5.5 mm
- Wago terminal block (5.0mm for awg 16-20 wires)
- Output voltage corresponds to input voltage
- Passive cooling (quiet fanless operation)
Environmental characteristics:
Operating temperature range: 0 to 50 °C
Storage temperature range 0 to 50 °C
Relative humidity range - 5 to 90% non-condensing
The equipment is PELV according to NFPA 79
Installation:
The unit can be installed on a wall or DIN rail using the supplied DIN clip on the injector body.
The injector is suitable for a wide range of network elements (access points, IP cameras, VoIP, modems, etc.).
Functions and features:
- An economical alternative to upgrade your network to IEEE 802.3at PoE+ or 802.3bt PoE++.
- Active PoE standard negotiation protects connected devices
- 2.5Gbps data transfer capacity
- PoE port with a maximum output of 90W
- Support for a wide range of IEEE 802.3at/bt (PoE+/PoE++) enabled devices
- Wall or DIN rail mounting flexibility for a variety of installation environments
- groove on the injector body for fixing multiple pieces into one block
Technical Specifications:
- Interface: 1x shielded RJ-45 LAN connector, 1x shielded RJ-45 LAN+POE connector.
- All 4 data pairs active for gigabit data rates
- Injector dimensions: 43 mm x 73 mm x 42 mm
- 90 watts delivered up to 100m with 56V power supply
- PoE operation in 4 pairs (Type 4 per 802.3bt)
- PoE operation in 2 pairs (Type 3 per 802.3at/af)
- Power jack input: 2.1 mm x 5.5 mm
- Wago terminal block (5.0mm for awg 16-20 wires)
- Output voltage corresponds to input voltage
- Passive cooling (quiet fanless operation)
Environmental characteristics:
Operating temperature range: 0 to 50 °C
Storage temperature range 0 to 50 °C
Relative humidity range - 5 to 90% non-condensing
The equipment is PELV according to NFPA 79
Installation:
The unit can be installed on a wall or DIN rail using the supplied DIN clip on the injector body.