DKK 0,00
(fragt pris: 0,00)
DJI SDR Transmission 2 Expansion Accessory Kit
Varenr.: [25908743] | Producent: Dji | Model-nr.: CP.TR.00000058.01 | EAN: 6937224148109
Fjargoymsla (Veitingartíð til DK goymslu er 3-5 gerandisdagar)
Fjargoymsluvøra, veitingartíð til DK goymslu er 3-5 gerandisdagar. Eftir tað verður vøran send úr DK fyrstkomandi týsdag, og leverað í FO eftirfylgjandi týsdag. Meira kunning
Leveringsmuligheder - Vælges ved checkout
Heintast
ÓKEYPIS
Pakkaboks
29,00
Útbering.
60,00
DKK
1.959,00
Uttan MVG 1.567,20
Prísur við heinting í Tórshavn ella Klaksvík
1.959,00
Legg aftrat lista
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Send på mail
1 TX to 8 RX With Control, Multi-Group Transmission
A single transmitter feeds up to eight receivers, each with remote control. Up to five transmitters and 40 receivers can operate simultaneously. Even in complex on-set environments, the wireless camera feed stays stable without sacrificing 4K image quality
Auto Channel 2.0 for Seamless, Stable Feed
With Auto Mode enabled, transceivers recognize one another and intelligently coordinate frequencies. More accurate spectrum scanning and conflict diagnostics allow each unit to hop frequencies seamlessly [9] as conditions change, maintaining a stable connection despite interference, even with multiple systems running side by side.
SDR, Evolved
It transmits DCI 4K/60fps, 10-bit HDR [3], and H.265 video at bitrates up to 50 Mbps [10] for ultra-high-definition monitoring. The transmission range reaches up to 4 km [4], easily handling everything from stadiums to dynamic car shoots. With latency as low as 35 ms [5], the video feed is near-instant, making remote commands like focus pulls and gimbal moves highly responsive.
TX/RX Switchable
The transceiver design lets you switch between TX and RX on the fly. There is no need to decide your TX-to-RX ratio in advance, so every unit adapts to whatever the shoot calls for. Weighing only about 136 g, the unit reduces the load on handheld gimbals and mounts easily across a wide range of camera setups. It also provides 1 HDMI and 2 USB-C ports.
Pro Monitoring, Flexible Output
Quickly switch between camera feeds directly from the transceiver or the DJI Ronin app. Output the ultra-high-definition, low-latency video feed to pro monitors via SDI [11], HDMI, or DP ports. You can also connect a smartphone or tablet to the receiver [12] via USB-C for a stable, high-bitrate wired monitoring feed.
Ronin Ecosystem and Beyond
When paired with DJI RS series gimbals [6], you can wirelessly control gimbal movements and trigger recording with your smartphone. Connect to DJI Ronin 2 and Master Wheels [6] to precisely control heavy cinema cameras on car mounts or crane rigs. Or, link an Osmo Action or Pocket series device [7] for a lightweight setup to capture sports and other unique angles.
A single transmitter feeds up to eight receivers, each with remote control. Up to five transmitters and 40 receivers can operate simultaneously. Even in complex on-set environments, the wireless camera feed stays stable without sacrificing 4K image quality
Auto Channel 2.0 for Seamless, Stable Feed
With Auto Mode enabled, transceivers recognize one another and intelligently coordinate frequencies. More accurate spectrum scanning and conflict diagnostics allow each unit to hop frequencies seamlessly [9] as conditions change, maintaining a stable connection despite interference, even with multiple systems running side by side.
SDR, Evolved
It transmits DCI 4K/60fps, 10-bit HDR [3], and H.265 video at bitrates up to 50 Mbps [10] for ultra-high-definition monitoring. The transmission range reaches up to 4 km [4], easily handling everything from stadiums to dynamic car shoots. With latency as low as 35 ms [5], the video feed is near-instant, making remote commands like focus pulls and gimbal moves highly responsive.
TX/RX Switchable
The transceiver design lets you switch between TX and RX on the fly. There is no need to decide your TX-to-RX ratio in advance, so every unit adapts to whatever the shoot calls for. Weighing only about 136 g, the unit reduces the load on handheld gimbals and mounts easily across a wide range of camera setups. It also provides 1 HDMI and 2 USB-C ports.
Pro Monitoring, Flexible Output
Quickly switch between camera feeds directly from the transceiver or the DJI Ronin app. Output the ultra-high-definition, low-latency video feed to pro monitors via SDI [11], HDMI, or DP ports. You can also connect a smartphone or tablet to the receiver [12] via USB-C for a stable, high-bitrate wired monitoring feed.
Ronin Ecosystem and Beyond
When paired with DJI RS series gimbals [6], you can wirelessly control gimbal movements and trigger recording with your smartphone. Connect to DJI Ronin 2 and Master Wheels [6] to precisely control heavy cinema cameras on car mounts or crane rigs. Or, link an Osmo Action or Pocket series device [7] for a lightweight setup to capture sports and other unique angles.