DKK 0,00
(fragt pris: 0,00)
Vivolink 18G HDMI 5 Volt EDID Manager, 60 mm, 54 mm, 17,6 mm, 600 g, 700 g
Varenr.: [25729633] | Producent: VivoLink | Model-nr.: VLHDMICTL3 | EAN: 5715328176355
Fjargoymsla (Veitingartíð til DK goymslu er 2-3 gerandisdagar)
Fjargoymsluvøra, veitingartíð til DK goymslu er 2-3 gerandisdagar. Eftir tað verður vøran send úr DK fyrstkomandi týsdag, og leverað í FO eftirfylgjandi týsdag. Meira kunning
Leveringsmuligheder - Vælges ved checkout
Heintast
ÓKEYPIS
Útbering.
60,00
DKK
1.715,00
Uttan MVG 1.372,00
Prísur við heinting í Tórshavn ella Klaksvík
1.715,00
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Opret bruger
Login
Opret bruger
Login
Send på mail
VLHDMICLT3 – HDMI 5V & EDID Manager
The VLHDMICLT3 is a versatile HDMI management tool designed to handle both 5V power and EDID control. Its primary function is to remove the 5V signal in HDMI connections. The device automatically controls the 5V output based on the presence of a video signal in the cable.
Additionally, it can be used to manage and adjust signal resolutions from source/ devices. Configuration is simple and intuitive, thanks to the front-mounted DIP switches that allow quick and easy setup.
Also there is a possibility to do HDCP control via DIP switch (set unit as non HDCP compliant) can improve compatibility when several of products are connected.
The CEC pass-through can be turned on/off by DIP switch
The VLHDMICLT3 is a versatile HDMI management tool designed to handle both 5V power and EDID control. Its primary function is to remove the 5V signal in HDMI connections. The device automatically controls the 5V output based on the presence of a video signal in the cable.
Additionally, it can be used to manage and adjust signal resolutions from source/ devices. Configuration is simple and intuitive, thanks to the front-mounted DIP switches that allow quick and easy setup.
Also there is a possibility to do HDCP control via DIP switch (set unit as non HDCP compliant) can improve compatibility when several of products are connected.
The CEC pass-through can be turned on/off by DIP switch