DKK 0,00
(fragt pris: 0,00)
NOCH Cork Track Bed, 2 mm high, N (1:160), Brun
Varenr.: [1914679] | Producent: NOCH | Model-nr.: 50490 | EAN: 4007246504909
Jule info
Bestil senest onsdag 10-12-2025 kl. 12:00 for at sikre afsendelse inden jul. Bestil gerne før - da vi har travlt :-)
Fjargoymsla (Veitingartíð til DK goymslu er 3-4 gerandisdagar)
Fjargoymsluvøra, veitingartíð til DK goymslu er 3-4 gerandisdagar. Eftir tað verður vøran send úr DK fyrstkomandi týsdag, og leverað í FO eftirfylgjandi týsdag. Meira kunning
Heintast í handli
Sí allar møguleikar
| Heintast | ÓKEYPIS |
| Útbering. | 95,00 |
DKK
200,00
Uttan MVG 160,00
Prísur við heinting í Tórshavn ella Klaksvík
200,00
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Opret bruger
Login
Opret bruger
Login
Send på mail
New Embedding for Your Tracks!
Following many requests NOCH launch a range of Cork Trackbeds for H0, TT, H0m and N scale this year. In addition for H0 scale the corresponding formed parts for Märklin® K Tracks are available.
The Cork Trackbeds of 50 cm (19.69 in.) length are suitable for »free« routes. These are provided with a mitre cut in the middle, so they can simply be bent to the outside on the edges in order to separate the Trackbed in two strips. Afterwards the separated strips with the sloped edges are glued outwards, against each other, on the layout base.
By doing so the single strips can be easily adapted to straight and curved routes. Every Cork Plate has a sloped edge on the outside. If desired, the edge can be bent to create a realistic slope.
Following many requests NOCH launch a range of Cork Trackbeds for H0, TT, H0m and N scale this year. In addition for H0 scale the corresponding formed parts for Märklin® K Tracks are available.
The Cork Trackbeds of 50 cm (19.69 in.) length are suitable for »free« routes. These are provided with a mitre cut in the middle, so they can simply be bent to the outside on the edges in order to separate the Trackbed in two strips. Afterwards the separated strips with the sloped edges are glued outwards, against each other, on the layout base.
By doing so the single strips can be easily adapted to straight and curved routes. Every Cork Plate has a sloped edge on the outside. If desired, the edge can be bent to create a realistic slope.