DKK 0,00
(fragt pris: 0,00)
InLine 89003, 50 m, Sort
Varenr.: [10758367] | Producent: Inline | Model-nr.: 89003 | EAN: 4043718192519
Fjargoymsla (Veitingartíð til DK goymslu er 14-21 gerandisdagar)
Fjargoymsluvøra, veitingartíð til DK goymslu er 14-21 gerandisdagar. Eftir tað verður vøran send úr DK fyrstkomandi týsdag, og leverað í FO eftirfylgjandi týsdag. Meira kunning
Leveringsmuligheder - Vælges ved checkout
Heintast
ÓKEYPIS
Útbering.
95,00
DKK
115,00
Uttan MVG 92,00
Prísur við heinting í Tórshavn ella Klaksvík
115,00
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Opret bruger
Login
Opret bruger
Login
Send på mail
Analog audio connections via RJ45 without active devices
Room-to-room transmission:Route analog stereo signals over passive structured RJ45 cabling using patch cables.
Simple setup:Passive operation without power supply or active network devices.
Flexible connectors:2x RCA plugs and 1x 3.5 mm jack plug connect common sources and receivers.
Longer distances possible:Up to 50 m depending on conductor cross-section and contact resistance of the patch cable.
Ready to use:Set with 2 adapters and approx. 10 cm connection cable each.
The passive adapter set enables the transmission of analog stereo audio signals over existing RJ45 cabling. Patch cables are used to connect between 2x RCA or 1x 3.5 mm jack and an RJ45 socket. This allows you to quickly set up connections between rooms without additional active devices.
In professional IT environments, for on-site deployments and in service operations, existing infrastructure can be used efficiently. Existing patch panels and cable routes enable temporary or permanent audio connections between rooms without laying new cables.
Set:2 adapters
Connection 1:2x RCA plugs to RJ45 socket
Connection 2:1x 3.5 mm jack plug to RJ45 socket
Signal:Analog stereo
Maximum patch cable length:50 m (depending on conductor cross-section and contact resistance)
Cable length:2x approx. 10 cm
Room-to-room transmission:Route analog stereo signals over passive structured RJ45 cabling using patch cables.
Simple setup:Passive operation without power supply or active network devices.
Flexible connectors:2x RCA plugs and 1x 3.5 mm jack plug connect common sources and receivers.
Longer distances possible:Up to 50 m depending on conductor cross-section and contact resistance of the patch cable.
Ready to use:Set with 2 adapters and approx. 10 cm connection cable each.
The passive adapter set enables the transmission of analog stereo audio signals over existing RJ45 cabling. Patch cables are used to connect between 2x RCA or 1x 3.5 mm jack and an RJ45 socket. This allows you to quickly set up connections between rooms without additional active devices.
In professional IT environments, for on-site deployments and in service operations, existing infrastructure can be used efficiently. Existing patch panels and cable routes enable temporary or permanent audio connections between rooms without laying new cables.
Set:2 adapters
Connection 1:2x RCA plugs to RJ45 socket
Connection 2:1x 3.5 mm jack plug to RJ45 socket
Signal:Analog stereo
Maximum patch cable length:50 m (depending on conductor cross-section and contact resistance)
Cable length:2x approx. 10 cm