DKK 0,00
(fragt pris: 0,00)
HAZET 2128N-1, 1 stk
Varenr.: [10599919] | Producent: Hazet | Model-nr.: 2128N-1 | EAN: 4000896218844
Fjargoymsla (Veitingartíð til DK goymslu er 3-4 gerandisdagar)
Fjargoymsluvøra, veitingartíð til DK goymslu er 3-4 gerandisdagar. Eftir tað verður vøran send úr DK fyrstkomandi týsdag, og leverað í FO eftirfylgjandi týsdag. Meira kunning
Leveringsmuligheder - Vælges ved checkout
Heintast
ÓKEYPIS
Útbering.
60,00
DKK
1.605,00
Uttan MVG 1.284,00
Prísur við heinting í Tórshavn ella Klaksvík
1.605,00
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Opret bruger
Login
Opret bruger
Login
Send på mail
Skal du bruge en reservedel til dit el-værktøj?
Vores konfigurator viser præcis de dele, der passer til 2128N-1 - kulbørster, afbrydere, gear, borepatroner, batterier og meget mere.
Find reservedele til din model- Dele til denne model på lager
- Levering 1-2 hverdage
- Originale og kompatible dele
Application:
Drilling machines and drill stands with round shank drill holder.
Case-hardened steel ∙ grey cast iron ∙ cast iron ∙ cast steel ∙ rigid plastic ∙ heat-resistant steel ∙ cold-worked steel ∙ plastic ∙ alloyed steel (up to 900 N/mm² solidity) ∙ non-ferrous metal ∙ stainless steel ∙ acid-resistant steel ∙ sintered iron ∙ steel casting ∙ malleable iron ∙ unalloyed steel ∙ tempered steel ∙ hot steel
Save time and energy: The HSS twist drills enable rapid drilling with less contact force than conventional drills
Powerful, precision-ground twist drills made of high performance HS steel (HSS)
Self-centring drill bit with taper surface grinding according to DIN 1412 ∙ 118° point angle ∙ perfect centring without centre punch or wandering
Two cutting edges and two spiral grooves remove the chip quickly and extend the use life
Long use life (service life), excellent wear resistance thanks to robust core thickness and marked hardness (surface finish) for the working area
Cylindrical shaft (shaft ⌀ corresponds to drill ⌀) ∙ diameter tolerance h 8 ∙ highest precision (increased concentricity)
25-piece, ⌀ 1 – 13 mm increasing by 0.5 mm: 1 drill each x ⌀ 1.0 ∙ 1.5 ∙ 2.0 ∙ 2.5 ∙ 3.0 ∙ 3.5 ∙ 4.0 ∙ 4.5 ∙ 5.0 ∙ 5.5 ∙ 6.0 ∙ 6.5 ∙ 7.0 ∙ 7.5 ∙ 8.0 ∙ 8.5 ∙ 9.0 ∙ 9.5 ∙ 10.0 ∙ 10.5 ∙ 11.0 ∙ 11.5 ∙ 12.0 ∙ 12.5 ∙ 13.0 mm
Right hand cutting
Drilling machines and drill stands with round shank drill holder.
Case-hardened steel ∙ grey cast iron ∙ cast iron ∙ cast steel ∙ rigid plastic ∙ heat-resistant steel ∙ cold-worked steel ∙ plastic ∙ alloyed steel (up to 900 N/mm² solidity) ∙ non-ferrous metal ∙ stainless steel ∙ acid-resistant steel ∙ sintered iron ∙ steel casting ∙ malleable iron ∙ unalloyed steel ∙ tempered steel ∙ hot steel
Save time and energy: The HSS twist drills enable rapid drilling with less contact force than conventional drills
Powerful, precision-ground twist drills made of high performance HS steel (HSS)
Self-centring drill bit with taper surface grinding according to DIN 1412 ∙ 118° point angle ∙ perfect centring without centre punch or wandering
Two cutting edges and two spiral grooves remove the chip quickly and extend the use life
Long use life (service life), excellent wear resistance thanks to robust core thickness and marked hardness (surface finish) for the working area
Cylindrical shaft (shaft ⌀ corresponds to drill ⌀) ∙ diameter tolerance h 8 ∙ highest precision (increased concentricity)
25-piece, ⌀ 1 – 13 mm increasing by 0.5 mm: 1 drill each x ⌀ 1.0 ∙ 1.5 ∙ 2.0 ∙ 2.5 ∙ 3.0 ∙ 3.5 ∙ 4.0 ∙ 4.5 ∙ 5.0 ∙ 5.5 ∙ 6.0 ∙ 6.5 ∙ 7.0 ∙ 7.5 ∙ 8.0 ∙ 8.5 ∙ 9.0 ∙ 9.5 ∙ 10.0 ∙ 10.5 ∙ 11.0 ∙ 11.5 ∙ 12.0 ∙ 12.5 ∙ 13.0 mm
Right hand cutting