DKK 0,00
(fragt pris: 0,00)
ABUS SE1100, IP55, Grå, Metal, 134 x 42 x 106 mm, 311 g, 150 x 110 x 75 mm
Varenr.: [10312222] | Producent: ABUS | Model-nr.: SE1100 | EAN: 4012270001478
Fjargoymsla (Veitingartíð til DK goymslu er 14-21 gerandisdagar)
Fjargoymsluvøra, veitingartíð til DK goymslu er 14-21 gerandisdagar. Eftir tað verður vøran send úr DK fyrstkomandi týsdag, og leverað í FO eftirfylgjandi týsdag. Meira kunning
Leveringsmuligheder - Vælges ved checkout
Heintast
ÓKEYPIS
Pakkaboks
29,00
Útbering.
95,00
DKK
790,00
Uttan MVG 632,00
Prísur við heinting í Tórshavn ella Klaksvík
790,00
Legg aftrat lista
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Send på mail
- High security – cannot be removed illegally
- Simple activating and deactivating
- For flush fitting
- Tamper-monitored
Use the flush mount key-switch to arm and disarm your alarm system. Simply turn the key instead of entering a PIN code. Operating your system is faster and easier.
Apart from the arm/disarm function of the alarm system (or individual partitions), you can use flush mount the key-switch to control electronic equipment (entrance lighting, garage door, etc.). Two switch contacts are provided. You can set these as a permanent contact or as a pulse generator.
The two coloured LEDs inform you permanently about the state of connected devices. For example, you can see if the system is currently armed or disarmed. The reinforced fascia plate, the high-quality ABUS cylinder and a robust weatherproof housing (IP 55) protect the key-switch against external influences.
The flush mount key-switch is designed for half-cylinders (10/30). It is available for both surface and flush fitting. The surface-fitted variant is protected from tampering by a cover contact and an anti-removal wall contact.
- Simple activating and deactivating
- For flush fitting
- Tamper-monitored
Use the flush mount key-switch to arm and disarm your alarm system. Simply turn the key instead of entering a PIN code. Operating your system is faster and easier.
Apart from the arm/disarm function of the alarm system (or individual partitions), you can use flush mount the key-switch to control electronic equipment (entrance lighting, garage door, etc.). Two switch contacts are provided. You can set these as a permanent contact or as a pulse generator.
The two coloured LEDs inform you permanently about the state of connected devices. For example, you can see if the system is currently armed or disarmed. The reinforced fascia plate, the high-quality ABUS cylinder and a robust weatherproof housing (IP 55) protect the key-switch against external influences.
The flush mount key-switch is designed for half-cylinders (10/30). It is available for both surface and flush fitting. The surface-fitted variant is protected from tampering by a cover contact and an anti-removal wall contact.