DKK 0,00
(fragt pris: 0,00)
METZ CONNECT CPW-E12, Sort, Hvid, 230 - 400 V, 250 V, 10 A, 22,5 x 95 x 75 mm, 170 g
Varenr.: [10279551] | Producent: Metz | Model-nr.: 1102810520 | EAN: 4250184121039
Fjargoymsla (Veitingartíð til DK goymslu er 14-21 gerandisdagar)
Fjargoymsluvøra, veitingartíð til DK goymslu er 14-21 gerandisdagar. Eftir tað verður vøran send úr DK fyrstkomandi týsdag, og leverað í FO eftirfylgjandi týsdag. Meira kunning
Leveringsmuligheder - Vælges ved checkout
Heintast
ÓKEYPIS
Pakkaboks
29,00
Útbering.
95,00
DKK
885,00
Uttan MVG 708,00
Prísur við heinting í Tórshavn ella Klaksvík
885,00
Legg aftrat lista
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Send på mail
The cosPhi monitor is used for detecting underload. The response value and the response time can be adjusted. It can also be used in combination with a frequency converter (frequency: 2 to 200 Hz). Monitoring is accomplished by recognizing the phase shift between current and voltage. This phase angle varies depending on the motor load.
The functions can be adjusted by means of bridges S1 - S2 - S3S1 - S2 open = relay deactivated with underloadS1 - S2 bridged = relay activated with underloadS1 - S3 open = with fault memoryS1 - S3 bridged = without fault memoryThe module can be unblocked remotely by means of a closing contact on S1 - S3.If there is a fault memory (no bridge over S1-S3), the fault message is active until it is acknowledged or the supply voltage is interrupted.
The functions can be adjusted by means of bridges S1 - S2 - S3S1 - S2 open = relay deactivated with underloadS1 - S2 bridged = relay activated with underloadS1 - S3 open = with fault memoryS1 - S3 bridged = without fault memoryThe module can be unblocked remotely by means of a closing contact on S1 - S3.If there is a fault memory (no bridge over S1-S3), the fault message is active until it is acknowledged or the supply voltage is interrupted.