DKK 0,00
(fragt pris: 0,00)
Brilliant Tools BT114900 BT114900 Digital skydelære 150 mm
Varenr.: [10066971] | Producent: KS Tools | Model-nr.: BT114900 | EAN: 4042146778456
Fjargoymsla (Veitingartíð til DK goymslu er 5-7 gerandisdagar)
Fjargoymsluvøra, veitingartíð til DK goymslu er 5-7 gerandisdagar. Eftir tað verður vøran send úr DK fyrstkomandi týsdag, og leverað í FO eftirfylgjandi týsdag. Meira kunning
Leveringsmuligheder - Vælges ved checkout
Heintast
ÓKEYPIS
Útbering.
95,00
DKK
340,00
Uttan MVG 272,00
Prísur við heinting í Tórshavn ella Klaksvík
340,00
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Opret bruger
Login
Opret bruger
Login
Send på mail
Ideally suited for interior/exterior and depth measurements
Made of carbon fibre
Quick reading off of the measured values from the digital display
Can be switched from millimetres to inches
With the BRILLIANT TOOLS digital Vernier calliper BT114900, inner and outer diameters as well as gaps and thicknesses between 0 and 15 cm can be determined precisely. The digital Vernier calliper is equipped with two inner measuring surfaces and two opposing outer callipers. The determined value can either be read analogously or via the LCD display. The digital display can be switched from millimetres to inches as needed (measuring range 0” to 6”). The Vernier calliper is made of carbon fibre. Thanks to the compact length of 23.5 cm, there is room for the tool in every tool case. A battery is required to operate the display, and is included in the contents.
Made of carbon fibre
Quick reading off of the measured values from the digital display
Can be switched from millimetres to inches
With the BRILLIANT TOOLS digital Vernier calliper BT114900, inner and outer diameters as well as gaps and thicknesses between 0 and 15 cm can be determined precisely. The digital Vernier calliper is equipped with two inner measuring surfaces and two opposing outer callipers. The determined value can either be read analogously or via the LCD display. The digital display can be switched from millimetres to inches as needed (measuring range 0” to 6”). The Vernier calliper is made of carbon fibre. Thanks to the compact length of 23.5 cm, there is room for the tool in every tool case. A battery is required to operate the display, and is included in the contents.